
Ask most distributors who their customer is, and you’ll hear the name of a contractor, an owner, or a purchasing manager. Those are the people on the account, the ones who get the line card and the call from the outside salesperson.
Ask the people in the truck, and you may get a different answer.
Trade Hounds, America’s largest community for the skilled trades, recently polled members about how they buy, stock, and discuss products. The results point to an influential buyer the channel may be overlooking: the technician.
Who decides what gets bought
We asked 389 members who usually decides what to buy for a service call. Forty-three percent said the technician. Another 33% said it depends on the job. The manager or owner made the decision 16% of the time, while 7% cited an approved product list. Just 1% said the distributor decides.
|
Who usually decides what to buy for a service call? |
Share |
| The technician | 43% |
| It depends on the job | 33% |
| Manager or owner | 16% |
| Approved product list | 7% |
| The distributor | 1% |
Service work often requires decisions in the field, where a technician must assess the problem and determine which part or solution will work. Even when the choice isn’t entirely theirs, technicians can have a meaningful influence on what gets used.
On service calls, purchasing decisions aren’t always governed by formal processes. The problem may not become clear until a technician is on site, making product selection part of the work itself.
This isn’t an entirely new shift. In a 2021 survey of more than 750 contractors, Channel Marketing Group found that inside salespeople were increasingly important to contractors and that more business was moving to phone, text, and email rather than the counter.
The way contractors buy materials has been evolving for years. Trade Hounds’ findings raise a related question: How well do distributors understand the technicians influencing product decisions in the field?
The truck is its own branch
If technicians influence what gets used on the job, their service trucks offer another window into how purchasing decisions happen. What’s stocked, what’s missing, and who decides what to replenish can all affect where the next purchase goes.
We asked 130 members how the inventory on their service trucks is managed.
|
How is the inventory on your service truck managed? |
Share |
| I choose what to stock | 48% |
| No formal process | 24% |
| Based on past use | 17% |
| We use a standard list | 10% |
| Software recommends it | 1% |
Nearly half of respondents said they choose what to stock themselves. Another 24% reported having no formal process. Together, those responses account for 72% of members who either make stocking decisions themselves or work without a formal process.
By comparison, 10% said they follow a standard list, and just 1% reported using software recommendations.
Service-truck inventory management often relies on individual judgment rather than standardized systems. For distributors used to managing inventory and replenishment at the branch level, the truck presents a different challenge: understanding what technicians need before they run out.
What runs out?
In the poll’s comments, members most frequently mentioned receptacles, followed by self-tapping screws, contactors, and fuses.
These are familiar products, but their availability can make a difference in the middle of a job. When a technician runs out of a needed part, the next step may be an additional trip, an alternative product, or a call to another supplier.
That creates an opportunity for distributors to better understand the products technicians use most often and how they prefer to replenish them. A more proactive approach to truck stock could help reduce last-minute trips and give distributors another way to support customers between branch visits.
Why it matters
Each service truck functions, in some ways, like a small branch. It holds inventory, supports day-to-day work, and creates recurring purchasing needs. But unlike a traditional branch, its stocking decisions may rest largely with the technician.
That presents both a challenge and an opportunity.
The challenge: When a product isn’t available, technicians may look elsewhere. In a separate poll of 214 Trade Hounds members, 38% said their first move when their distributor is out of stock is to ask a competing supplier.
The opportunity: Distributors that understand what technicians regularly use—and make replenishment easier—will be better positioned to capture those purchases and strengthen their relationships with the people using their products.
Product problems go around you
Technicians don’t just select products and manage truck inventory. They’re also on the front lines when something doesn’t work as expected. Where that feedback goes can influence future purchasing decisions and relationships with suppliers.
We asked 165 members who they tell when they have a problem with a product.
|
Who do you tell when you have a problem with a product? |
Share |
| Manager or owner | 41% |
| Manufacturer rep | 30% |
| Distributor staff | 15% |
| Other technicians | 8% |
| I do not report it | 6% |
Only 15% of respondents said they bring product problems to distributor staff. The remaining 85% report problems to someone else or don’t report them at all.
That doesn’t necessarily mean distributors never hear about these issues. A manager may relay a complaint, for example, or a manufacturer rep may bring it to the branch’s attention. But the results make clear that distributors aren’t the first point of contact for most technicians reporting product problems.
Consider the three findings together:
- Product selection: 43% say the technician decides what to buy for a service call, while another 33% say the decision depends on the job.
- Truck inventory: 48% choose what to stock themselves, and another 24% report no formal stocking process.
- Product feedback: Just 15% report product problems directly to distributor staff.
The common thread is the technician’s influence over product selection, availability, and feedback—and the opportunity for distributors to build stronger connections with the people closest to the work.
For manufacturers and their representatives, the results offer another point of entry. Nearly a third of respondents said they report product problems to a manufacturer rep. That direct line to the field can provide useful insight into product performance, recurring issues, and customer needs.
The question is how that feedback is used—and whether it reaches the distributor serving the account.
What the findings mean
These polls highlight a part of the buying process that can be easy to overlook when relationships are managed primarily at the account level.
For distributors
Get to know the technicians on your accounts. Your CRM may list the owner and accounts payable contact, but do you know the lead technicians and the people making product decisions in the field? Ask inside sales teams who they interact with most frequently and whether those relationships are reflected in your account strategy.
Meet technicians where they are. Product training, counter days, and ride-alongs can help distributors build relationships with the people using their products. But those relationships don’t have to start at the branch or on the jobsite. Participating in online communities and social media platforms where tradespeople share product recommendations, ask questions, and discuss challenges can help distributors build familiarity and trust over time. The goal is to engage technicians in the spaces they already use, rather than relying solely on traditional sales channels.
Explore service-truck stocking programs. With 72% of respondents reporting that they either choose their own stock or have no formal process, there may be room for distributors to help customers establish more consistent replenishment routines.
Make product feedback easier to share. Only 15% of respondents said they report product problems to distributor staff. A dedicated text line, QR code, or simple digital form could give technicians a more direct way to report issues. Following up on that feedback can help distributors identify recurring problems and demonstrate that they’re listening.
For manufacturers
Build programs for the people using the products. If technicians influence product selection, training, product information, and other engagement efforts should reach them directly as well as the owner or purchasing contact.
Help distributors support truck stock. Recommended stocking lists for specific product categories can give technicians a starting point for identifying frequently used items. Developed with distributor partners, these resources can also help connect product awareness with availability.
Treat field feedback as product intelligence. Reports from technicians can help manufacturers identify recurring product issues and understand how products perform in real-world conditions. Tracking those reports and sharing relevant findings with distributor partners can help both parties respond more effectively.
For manufacturer reps
Treat product problems as opportunities to build relationships. Nearly a third of respondents said they bring product issues to manufacturer reps. A timely, helpful response can strengthen trust while giving reps a clearer understanding of what’s happening in the field.
Keep distributor partners informed. When appropriate, sharing technician feedback with the distributor can help close the loop, support the customer, and strengthen coordination between the manufacturer and the branch.
A question to take back to your team
Who on each of your top accounts actually influences what gets bought, stocked, and replaced—and when did someone from your company last talk to them?
The owner may still sign the checks. But the technician is often the person closest to the product decision when a service call puts it to the test.
Understanding that role could be an important step toward better customer relationships, more responsive inventory support, and a clearer picture of how products are selected in the field.
About Trade Hounds
Learn more at tradehounds.com. To learn more about this research or advertising opportunities with Trade Hounds, contact Jeanette Abrahamsen, VP of Marketing, at jeanette@tradehounds.com

Leave a Reply Cancel reply